| PostgreSQL 9.5.0 Documentation | |||
|---|---|---|---|
| Prev | Up | Chapter 40. PL/pgSQL - SQL Procedural Language | Next |
Control structures are probably the most useful (and important) part of PL/pgSQL. With PL/pgSQL's control structures, you can manipulate PostgreSQL data in a very flexible and powerful way.
There are two commands available that allow you to return data from a function: RETURN and RETURN NEXT.
RETURN expression;
RETURN with an expression terminates the function and returns the value of expression to the caller. This form is used for PL/pgSQL functions that do not return a set.
In a function that returns a scalar type, the expression's result will automatically be cast into the function's return type as described for assignments. But to return a composite (row) value, you must write an expression delivering exactly the requested column set. This may require use of explicit casting.
If you declared the function with output parameters, write just RETURN with no expression. The current values of the output parameter variables will be returned.
If you declared the function to return void, a RETURN statement can be used to exit the function early; but do not write an expression following RETURN.
The return value of a function cannot be left undefined. If control reaches the end of the top-level block of the function without hitting a RETURN statement, a run-time error will occur. This restriction does not apply to functions with output parameters and functions returning void, however. In those cases a RETURN statement is automatically executed if the top-level block finishes.
Some examples:
-- functions returning a scalar type RETURN 1 + 2; RETURN scalar_var; -- functions returning a composite type RETURN composite_type_var; RETURN (1, 2, 'three'::text); -- must cast columns to correct types
RETURN NEXT expression;
RETURN QUERY query;
RETURN QUERY EXECUTE command-string [ USING expression [, ... ] ];When a PL/pgSQL function is declared to return SETOF sometype, the procedure to follow is slightly different. In that case, the individual items to return are specified by a sequence of RETURN NEXT or RETURN QUERY commands, and then a final RETURN command with no argument is used to indicate that the function has finished executing. RETURN NEXT can be used with both scalar and composite data types; with a composite result type, an entire "table" of results will be returned. RETURN QUERY appends the results of executing a query to the function's result set. RETURN NEXT and RETURN QUERY can be freely intermixed in a single set-returning function, in which case their results will be concatenated.
RETURN NEXT and RETURN QUERY do not actually return from the function — they simply append zero or more rows to the function's result set. Execution then continues with the next statement in the PL/pgSQL function. As successive RETURN NEXT or RETURN QUERY commands are executed, the result set is built up. A final RETURN, which should have no argument, causes control to exit the function (or you can just let control reach the end of the function).
RETURN QUERY has a variant RETURN QUERY EXECUTE, which specifies the query to be executed dynamically. Parameter expressions can be inserted into the computed query string via USING, in just the same way as in the EXECUTE command.
If you declared the function with output parameters, write just RETURN NEXT with no expression. On each execution, the current values of the output parameter variable(s) will be saved for eventual return as a row of the result. Note that you must declare the function as returning SETOF record when there are multiple output parameters, or SETOF sometype when there is just one output parameter of type sometype, in order to create a set-returning function with output parameters.
Here is an example of a function using RETURN NEXT:
CREATE TABLE foo (fooid INT, foosubid INT, fooname TEXT);
INSERT INTO foo VALUES (1, 2, 'three');
INSERT INTO foo VALUES (4, 5, 'six');
CREATE OR REPLACE FUNCTION get_all_foo() RETURNS SETOF foo AS
$BODY$
DECLARE
r foo%rowtype;
BEGIN
FOR r IN
SELECT * FROM foo WHERE fooid > 0
LOOP
-- can do some processing here
RETURN NEXT r; -- return current row of SELECT
END LOOP;
RETURN;
END
$BODY$
LANGUAGE plpgsql;
SELECT * FROM get_all_foo();
Here is an example of a function using RETURN QUERY:
CREATE FUNCTION get_available_flightid(date) RETURNS SETOF integer AS
$BODY$
BEGIN
RETURN QUERY SELECT flightid
FROM flight
WHERE flightdate >= $1
AND flightdate < ($1 + 1);
-- Since execution is not finished, we can check whether rows were returned
-- and raise exception if not.
IF NOT FOUND THEN
RAISE EXCEPTION 'No flight at %.', $1;
END IF;
RETURN;
END
$BODY$
LANGUAGE plpgsql;
-- Returns available flights or raises exception if there are no
-- available flights.
SELECT * FROM get_available_flightid(CURRENT_DATE);
Note: The current implementation of RETURN NEXT and RETURN QUERY stores the entire result set before returning from the function, as discussed above. That means that if a PL/pgSQL function produces a very large result set, performance might be poor: data will be written to disk to avoid memory exhaustion, but the function itself will not return until the entire result set has been generated. A future version of PL/pgSQL might allow users to define set-returning functions that do not have this limitation. Currently, the point at which data begins being written to disk is controlled by the work_mem configuration variable. Administrators who have sufficient memory to store larger result sets in memory should consider increasing this parameter.
IF and CASE statements let you execute alternative commands based on certain conditions. PL/pgSQL has three forms of IF:
IF ... THEN
IF ... THEN ... ELSE
IF ... THEN ... ELSIF ... THEN ... ELSE
and two forms of CASE:
CASE ... WHEN ... THEN ... ELSE ... END CASE
CASE WHEN ... THEN ... ELSE ... END CASE
IF boolean-expression THEN
statements
END IF;IF-THEN statements are the simplest form of IF. The statements between THEN and END IF will be executed if the condition is true. Otherwise, they are skipped.
Example:
IF v_user_id <> 0 THEN
UPDATE users SET email = v_email WHERE user_id = v_user_id;
END IF;
IF boolean-expression THEN
statements
ELSE
statements
END IF;IF-THEN-ELSE statements add to IF-THEN by letting you specify an alternative set of statements that should be executed if the condition is not true. (Note this includes the case where the condition evaluates to NULL.)
Examples:
IF parentid IS NULL OR parentid = ''
THEN
RETURN fullname;
ELSE
RETURN hp_true_filename(parentid) || '/' || fullname;
END IF;
IF v_count > 0 THEN
INSERT INTO users_count (count) VALUES (v_count);
RETURN 't';
ELSE
RETURN 'f';
END IF;
IF boolean-expression THEN
statements
[ ELSIF boolean-expression THEN
statements
[ ELSIF boolean-expression THEN
statements
...]]
[ ELSE
statements ]
END IF;Sometimes there are more than just two alternatives. IF-THEN-ELSIF provides a convenient method of checking several alternatives in turn. The IF conditions are tested successively until the first one that is true is found. Then the associated statement(s) are executed, after which control passes to the next statement after END IF. (Any subsequent IF conditions are not tested.) If none of the IF conditions is true, then the ELSE block (if any) is executed.
Here is an example:
IF number = 0 THEN
result := 'zero';
ELSIF number > 0 THEN
result := 'positive';
ELSIF number < 0 THEN
result := 'negative';
ELSE
-- hmm, the only other possibility is that number is null
result := 'NULL';
END IF;
The key word ELSIF can also be spelled ELSEIF.
An alternative way of accomplishing the same task is to nest IF-THEN-ELSE statements, as in the following example:
IF demo_row.sex = 'm' THEN
pretty_sex := 'man';
ELSE
IF demo_row.sex = 'f' THEN
pretty_sex := 'woman';
END IF;
END IF;
However, this method requires writing a matching END IF for each IF, so it is much more cumbersome than using ELSIF when there are many alternatives.
CASE search-expression
WHEN expression [, expression [ ... ]] THEN
statements
[ WHEN expression [, expression [ ... ]] THEN
statements
... ]
[ ELSE
statements ]
END CASE;The simple form of CASE provides conditional execution based on equality of operands. The search-expression is evaluated (once) and successively compared to each expression in the WHEN clauses. If a match is found, then the corresponding statements are executed, and then control passes to the next statement after END CASE. (Subsequent WHEN expressions are not evaluated.) If no match is found, the ELSE statements are executed; but if ELSE is not present, then a CASE_NOT_FOUND exception is raised.
Here is a simple example:
CASE x
WHEN 1, 2 THEN
msg := 'one or two';
ELSE
msg := 'other value than one or two';
END CASE;
CASE
WHEN boolean-expression THEN
statements
[ WHEN boolean-expression THEN
statements
... ]
[ ELSE
statements ]
END CASE;The searched form of CASE provides conditional execution based on truth of Boolean expressions. Each WHEN clause's boolean-expression is evaluated in turn, until one is found that yields true. Then the corresponding statements are executed, and then control passes to the next statement after END CASE. (Subsequent WHEN expressions are not evaluated.) If no true result is found, the ELSE statements are executed; but if ELSE is not present, then a CASE_NOT_FOUND exception is raised.
Here is an example:
CASE
WHEN x BETWEEN 0 AND 10 THEN
msg := 'value is between zero and ten';
WHEN x BETWEEN 11 AND 20 THEN
msg := 'value is between eleven and twenty';
END CASE;
This form of CASE is entirely equivalent to IF-THEN-ELSIF, except for the rule that reaching an omitted ELSE clause results in an error rather than doing nothing.
With the LOOP, EXIT, CONTINUE, WHILE, FOR, and FOREACH statements, you can arrange for your PL/pgSQL function to repeat a series of commands.
[ <<label>> ] LOOP statements END LOOP [ label ];
LOOP defines an unconditional loop that is repeated indefinitely until terminated by an EXIT or RETURN statement. The optional label can be used by EXIT and CONTINUE statements within nested loops to specify which loop those statements refer to.
EXIT [ label ] [ WHEN boolean-expression ];
If no label is given, the innermost loop is terminated and the statement following END LOOP is executed next. If label is given, it must be the label of the current or some outer level of nested loop or block. Then the named loop or block is terminated and control continues with the statement after the loop's/block's corresponding END.
If WHEN is specified, the loop exit occurs only if boolean-expression is true. Otherwise, control passes to the statement after EXIT.
EXIT can be used with all types of loops; it is not limited to use with unconditional loops.
When used with a BEGIN block, EXIT passes control to the next statement after the end of the block. Note that a label must be used for this purpose; an unlabeled EXIT is never considered to match a BEGIN block. (This is a change from pre-8.4 releases of PostgreSQL, which would allow an unlabeled EXIT to match a BEGIN block.)
Examples:
LOOP
-- some computations
IF count > 0 THEN
EXIT; -- exit loop
END IF;
END LOOP;
LOOP
-- some computations
EXIT WHEN count > 0; -- same result as previous example
END LOOP;
<<ablock>>
BEGIN
-- some computations
IF stocks > 100000 THEN
EXIT ablock; -- causes exit from the BEGIN block
END IF;
-- computations here will be skipped when stocks > 100000
END;
CONTINUE [ label ] [ WHEN boolean-expression ];
If no label is given, the next iteration of the innermost loop is begun. That is, all statements remaining in the loop body are skipped, and control returns to the loop control expression (if any) to determine whether another loop iteration is needed. If label is present, it specifies the label of the loop whose execution will be continued.
If WHEN is specified, the next iteration of the loop is begun only if boolean-expression is true. Otherwise, control passes to the statement after CONTINUE.
CONTINUE can be used with all types of loops; it is not limited to use with unconditional loops.
Examples:
LOOP
-- some computations
EXIT WHEN count > 100;
CONTINUE WHEN count < 50;
-- some computations for count IN [50 .. 100]
END LOOP;
[ <<label>> ] WHILE boolean-expression LOOP statements END LOOP [ label ];
The WHILE statement repeats a sequence of statements so long as the boolean-expression evaluates to true. The expression is checked just before each entry to the loop body.
For example:
WHILE amount_owed > 0 AND gift_certificate_balance > 0 LOOP
-- some computations here
END LOOP;
WHILE NOT done LOOP
-- some computations here
END LOOP;
[ <<label>> ] FOR name IN [ REVERSE ] expression .. expression [ BY expression ] LOOP statements END LOOP [ label ];
This form of FOR creates a loop that iterates over a range of integer values. The variable name is automatically defined as type integer and exists only inside the loop (any existing definition of the variable name is ignored within the loop). The two expressions giving the lower and upper bound of the range are evaluated once when entering the loop. If the BY clause isn't specified the iteration step is 1, otherwise it's the value specified in the BY clause, which again is evaluated once on loop entry. If REVERSE is specified then the step value is subtracted, rather than added, after each iteration.
Some examples of integer FOR loops:
FOR i IN 1..10 LOOP
-- i will take on the values 1,2,3,4,5,6,7,8,9,10 within the loop
END LOOP;
FOR i IN REVERSE 10..1 LOOP
-- i will take on the values 10,9,8,7,6,5,4,3,2,1 within the loop
END LOOP;
FOR i IN REVERSE 10..1 BY 2 LOOP
-- i will take on the values 10,8,6,4,2 within the loop
END LOOP;
If the lower bound is greater than the upper bound (or less than, in the REVERSE case), the loop body is not executed at all. No error is raised.
If a label is attached to the FOR loop then the integer loop variable can be referenced with a qualified name, using that label.
Using a different type of FOR loop, you can iterate through the results of a query and manipulate that data accordingly. The syntax is:
[ <<label>> ] FOR target IN query LOOP statements END LOOP [ label ];
The target is a record variable, row variable, or comma-separated list of scalar variables. The target is successively assigned each row resulting from the query and the loop body is executed for each row. Here is an example:
CREATE FUNCTION cs_refresh_mviews() RETURNS integer AS $$
DECLARE
mviews RECORD;
BEGIN
RAISE NOTICE 'Refreshing materialized views...';
FOR mviews IN SELECT * FROM cs_materialized_views ORDER BY sort_key LOOP
-- Now "mviews" has one record from cs_materialized_views
RAISE NOTICE 'Refreshing materialized view %s ...', quote_ident(mviews.mv_name);
EXECUTE format('TRUNCATE TABLE %I', mviews.mv_name);
EXECUTE format('INSERT INTO %I %s', mviews.mv_name, mviews.mv_query);
END LOOP;
RAISE NOTICE 'Done refreshing materialized views.';
RETURN 1;
END;
$$ LANGUAGE plpgsql;If the loop is terminated by an EXIT statement, the last assigned row value is still accessible after the loop.
The query used in this type of FOR statement can be any SQL command that returns rows to the caller: SELECT is the most common case, but you can also use INSERT, UPDATE, or DELETE with a RETURNING clause. Some utility commands such as EXPLAIN will work too.
PL/pgSQL variables are substituted into the query text, and the query plan is cached for possible re-use, as discussed in detail in Section 40.10.1 and Section 40.10.2.
The FOR-IN-EXECUTE statement is another way to iterate over rows:
[ <<label>> ] FOR target IN EXECUTE text_expression [ USING expression [, ... ] ] LOOP statements END LOOP [ label ];
This is like the previous form, except that the source query is specified as a string expression, which is evaluated and replanned on each entry to the FOR loop. This allows the programmer to choose the speed of a preplanned query or the flexibility of a dynamic query, just as with a plain EXECUTE statement. As with EXECUTE, parameter values can be inserted into the dynamic command via USING.
Another way to specify the query whose results should be iterated through is to declare it as a cursor. This is described in Section 40.7.4.
The FOREACH loop is much like a FOR loop, but instead of iterating through the rows returned by a SQL query, it iterates through the elements of an array value. (In general, FOREACH is meant for looping through components of a composite-valued expression; variants for looping through composites besides arrays may be added in future.) The FOREACH statement to loop over an array is:
[ <<label>> ] FOREACH target [ SLICE number ] IN ARRAY expression LOOP statements END LOOP [ label ];
Without SLICE, or if SLICE 0 is specified, the loop iterates through individual elements of the array produced by evaluating the expression. The target variable is assigned each element value in sequence, and the loop body is executed for each element. Here is an example of looping through the elements of an integer array:
CREATE FUNCTION sum(int[]) RETURNS int8 AS $$
DECLARE
s int8 := 0;
x int;
BEGIN
FOREACH x IN ARRAY $1
LOOP
s := s + x;
END LOOP;
RETURN s;
END;
$$ LANGUAGE plpgsql;The elements are visited in storage order, regardless of the number of array dimensions. Although the target is usually just a single variable, it can be a list of variables when looping through an array of composite values (records). In that case, for each array element, the variables are assigned from successive columns of the composite value.
With a positive SLICE value, FOREACH iterates through slices of the array rather than single elements. The SLICE value must be an integer constant not larger than the number of dimensions of the array. The target variable must be an array, and it receives successive slices of the array value, where each slice is of the number of dimensions specified by SLICE. Here is an example of iterating through one-dimensional slices:
CREATE FUNCTION scan_rows(int[]) RETURNS void AS $$
DECLARE
x int[];
BEGIN
FOREACH x SLICE 1 IN ARRAY $1
LOOP
RAISE NOTICE 'row = %', x;
END LOOP;
END;
$$ LANGUAGE plpgsql;
SELECT scan_rows(ARRAY[[1,2,3],[4,5,6],[7,8,9],[10,11,12]]);
NOTICE: row = {1,2,3}
NOTICE: row = {4,5,6}
NOTICE: row = {7,8,9}
NOTICE: row = {10,11,12}
By default, any error occurring in a PL/pgSQL function aborts execution of the function, and indeed of the surrounding transaction as well. You can trap errors and recover from them by using a BEGIN block with an EXCEPTION clause. The syntax is an extension of the normal syntax for a BEGIN block:
[ <<label>> ] [ DECLARE declarations ] BEGIN statements EXCEPTION WHEN condition [ OR condition ... ] THEN handler_statements [ WHEN condition [ OR condition ... ] THEN handler_statements ... ] END;
If no error occurs, this form of block simply executes all the statements, and then control passes to the next statement after END. But if an error occurs within the statements, further processing of the statements is abandoned, and control passes to the EXCEPTION list. The list is searched for the first condition matching the error that occurred. If a match is found, the corresponding handler_statements are executed, and then control passes to the next statement after END. If no match is found, the error propagates out as though the EXCEPTION clause were not there at all: the error can be caught by an enclosing block with EXCEPTION, or if there is none it aborts processing of the function.
The condition names can be any of those shown in Appendix A. A category name matches any error within its category. The special condition name OTHERS matches every error type except QUERY_CANCELED and ASSERT_FAILURE. (It is possible, but often unwise, to trap those two error types by name.) Condition names are not case-sensitive. Also, an error condition can be specified by SQLSTATE code; for example these are equivalent:
WHEN division_by_zero THEN ... WHEN SQLSTATE '22012' THEN ...
If a new error occurs within the selected handler_statements, it cannot be caught by this EXCEPTION clause, but is propagated out. A surrounding EXCEPTION clause could catch it.
When an error is caught by an EXCEPTION clause, the local variables of the PL/pgSQL function remain as they were when the error occurred, but all changes to persistent database state within the block are rolled back. As an example, consider this fragment:
INSERT INTO mytab(firstname, lastname) VALUES('Tom', 'Jones');
BEGIN
UPDATE mytab SET firstname = 'Joe' WHERE lastname = 'Jones';
x := x + 1;
y := x / 0;
EXCEPTION
WHEN division_by_zero THEN
RAISE NOTICE 'caught division_by_zero';
RETURN x;
END;When control reaches the assignment to y, it will fail with a division_by_zero error. This will be caught by the EXCEPTION clause. The value returned in the RETURN statement will be the incremented value of x, but the effects of the UPDATE command will have been rolled back. The INSERT command preceding the block is not rolled back, however, so the end result is that the database contains Tom Jones not Joe Jones.
Tip: A block containing an EXCEPTION clause is significantly more expensive to enter and exit than a block without one. Therefore, don't use EXCEPTION without need.
Example 40-2. Exceptions with UPDATE/INSERT
This example uses exception handling to perform either UPDATE or INSERT, as appropriate. It is recommended that applications use INSERT with ON CONFLICT DO UPDATE rather than actually using this pattern. This example serves primarily to illustrate use of PL/pgSQL control flow structures:
CREATE TABLE db (a INT PRIMARY KEY, b TEXT);
CREATE FUNCTION merge_db(key INT, data TEXT) RETURNS VOID AS
$$
BEGIN
LOOP
-- first try to update the key
UPDATE db SET b = data WHERE a = key;
IF found THEN
RETURN;
END IF;
-- not there, so try to insert the key
-- if someone else inserts the same key concurrently,
-- we could get a unique-key failure
BEGIN
INSERT INTO db(a,b) VALUES (key, data);
RETURN;
EXCEPTION WHEN unique_violation THEN
-- Do nothing, and loop to try the UPDATE again.
END;
END LOOP;
END;
$$
LANGUAGE plpgsql;
SELECT merge_db(1, 'david');
SELECT merge_db(1, 'dennis');This coding assumes the unique_violation error is caused by the INSERT, and not by, say, an INSERT in a trigger function on the table. It might also misbehave if there is more than one unique index on the table, since it will retry the operation regardless of which index caused the error. More safety could be had by using the features discussed next to check that the trapped error was the one expected.
Exception handlers frequently need to identify the specific error that occurred. There are two ways to get information about the current exception in PL/pgSQL: special variables and the GET STACKED DIAGNOSTICS command.
Within an exception handler, the special variable SQLSTATE contains the error code that corresponds to the exception that was raised (refer to Table A-1 for a list of possible error codes). The special variable SQLERRM contains the error message associated with the exception. These variables are undefined outside exception handlers.
Within an exception handler, one may also retrieve information about the current exception by using the GET STACKED DIAGNOSTICS command, which has the form:
GET STACKED DIAGNOSTICS variable { = | := } item [ , ... ];Each item is a key word identifying a status value to be assigned to the specified variable (which should be of the right data type to receive it). The currently available status items are shown in Table 40-1.
Table 40-1. Error Diagnostics Values
| Name | Type | Description |
|---|---|---|
| RETURNED_SQLSTATE | text | the SQLSTATE error code of the exception |
| COLUMN_NAME | text | the name of the column related to exception |
| CONSTRAINT_NAME | text | the name of the constraint related to exception |
| PG_DATATYPE_NAME | text | the name of the data type related to exception |
| MESSAGE_TEXT | text | the text of the exception's primary message |
| TABLE_NAME | text | the name of the table related to exception |
| SCHEMA_NAME | text | the name of the schema related to exception |
| PG_EXCEPTION_DETAIL | text | the text of the exception's detail message, if any |
| PG_EXCEPTION_HINT | text | the text of the exception's hint message, if any |
| PG_EXCEPTION_CONTEXT | text | line(s) of text describing the call stack |
If the exception did not set a value for an item, an empty string will be returned.
Here is an example:
DECLARE
text_var1 text;
text_var2 text;
text_var3 text;
BEGIN
-- some processing which might cause an exception
...
EXCEPTION WHEN OTHERS THEN
GET STACKED DIAGNOSTICS text_var1 = MESSAGE_TEXT,
text_var2 = PG_EXCEPTION_DETAIL,
text_var3 = PG_EXCEPTION_HINT;
END;
The GET [ CURRENT ] DIAGNOSTICS command retrieves information about current execution state (whereas the GET STACKED DIAGNOSTICS command discussed above reports information about the execution state as of a previous error). This command has the form:
GET [ CURRENT ] DIAGNOSTICS variable { = | := } item [ , ... ];
Currently only one information item is supported. Status item PG_CONTEXT will return a text string with line(s) of text describing the call stack. The first line refers to the current function and currently executing GET DIAGNOSTICS command. The second and any subsequent lines refer to calling functions further up the call stack. For example:
CREATE OR REPLACE FUNCTION outer_func() RETURNS integer AS $$
BEGIN
RETURN inner_func();
END;
$$ LANGUAGE plpgsql;
CREATE OR REPLACE FUNCTION inner_func() RETURNS integer AS $$
DECLARE
stack text;
BEGIN
GET DIAGNOSTICS stack = PG_CONTEXT;
RAISE NOTICE E'--- Call Stack ---\n%', stack;
RETURN 1;
END;
$$ LANGUAGE plpgsql;
SELECT outer_func();
NOTICE: --- Call Stack ---
PL/pgSQL function inner_func() line 5 at GET DIAGNOSTICS
PL/pgSQL function outer_func() line 3 at RETURN
CONTEXT: PL/pgSQL function outer_func() line 3 at RETURN
outer_func
------------
1
(1 row)